UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

Uddannelses- og Forskningsudvalget 2020-21
UFU Alm.del
Offentligt

Sagsnr

Projekttitel

0175-00004A

0175-00005A

AutoAI4CS Auto-Generated AI for Customer Service

JobMatch Using Machine Learning for Personalized and

Persuasive Job Recommendation

GS1 20 - OPTIMAL Ostomy Product that is Measuring

Abrupt Leakage

LEGALESE Danish Language Processing for Legal Texts

PIN Platform Intelligence in News

CryptQ Quantum Cryptography – Unbreakable data

protection secured by the laws of nature

FacilityCobot Automating Facility Management by

Collaborative Robots guided by Intelligent Sensors

NEXUS Next-Generation Ultracompact Spectrometers

Nye Tek

AutoAI4CS

JobMatch

0175-00008A

0175-00011A

0175-00014A

0175-00018A

0175-00019A

Nye Tek

OPTIMAL

LEGALESE

CryptQ

FacilityCobot

0175-00022A

0175-00028A

Nye Tek

NEXUS

InnoSHM

InnoSHM Innovative Structural Health Monitoring and Risk Nye Tek

Informed Structural Integrity Management

GS1 20 - ShipWeldFlow Digital Twins for robotic unit

welding analysis and optimization in ship production

Nye Tek

0175-00039A

ShipWeldFlow

0175-00041A

0175-00043A

0176-00012A

0176-00013A

0176-00014A

UnFoLD Unified platform for the Future of Learning and

Nye Tek

Development

DECOR Danish Ecosystem for Recycled powders and ingots Nye Tek

CSIC Clinical stem cell innovation and production center

Sund

UnFoLD

DECOR

CSIC

AI4Xray

UCon Clinical Testing

AI4Xray Intelligent prioritization and decision support for Sund

chest x-ray analysis

UCon Clinical Testing Clinical Testing of UCon: A New

Sund

Treatment for Overactive Bladder and Faecal Incontinence

by Dorsal Genital Nerve Stimulation

CHILD@HOME CHILDHOOD INFECTIONS: INNOVATIVE

DIAGNOSTICS AND ANTIBIOTIC USE

OSCAR One Stop Shop for Clinical Research

Hemp4Tex Sustainable Hemp Textiles – Approaching the

entire value chain

StarQuality Platform for Innovative New Green Gearing for

Danish Plant Breeding Industry

DecomBlades The circular economy value chains for

decommissioned wind turbine blades

DREAMS Digitally supported Environmental Assessment

for Sustainable Development Goals (SDGs)

ROROGREEN Green RORO shipping through digital

innovation

AEngine Zero-Carbon Ammonia Marine Engine

Sund

Grøn omstilling

0176-00020A

0176-00030A

0177-00002A

0177-00004A

0177-00006A

0177-00021A

CHILD@HOME

OSCAR

Hemp4Tex

StarQuality

DecomBlades

DREAMS

0177-00022A

0177-00029A

Grøn omstilling

ROROGREEN

AEngine

0177-00035A

RePlast Industrial recycling of post-consumer plastics –

inline analysis, documentation, and sorting

Grøn omstilling

RePlast

Akronym

Opslag

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

0177-00046A

0177-00065A

0177-00066A

0177-00071A

0177-00084A

GS20-1 ImproSil - ImproSil Improved float zone silicon for Grøn omstilling

better stability in power conversion

Mvolt Medium voltage power electronics for wind systems Grøn omstilling

Cool-Data Flexible Cooling of Data Centers

CALLISTE Calcined Clay-Limestone Technology Extension

GrassProCast Prediction of optimum harvest time to

achieve maximum protein content in grass for animal

forage and human food.

SuperTEM SuperTEM – monitoring and imaging of

groundwater resources for sustainable exploitation

Grøn omstilling

ImproSil

Mvolt

Cool-Data

CALLISTE

GrassProCast

0177-00085A

Grøn omstilling

SuperTEM

0177-00086A

0177-00103A

0177-00109A

ReDoCO2 Reducing and Documenting CO2 emissions from Grøn omstilling

Peatlands

LOWCARBFUELSDK HTL-fuels: low carbon fuels for aviation Grøn omstilling

and marine markets

GreenTan Green tanning technology to foster

Grøn omstilling

environmentally friendly transition and growth

ReDoCO2

LOWCARBFUELSDK

GreenTan

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

Total budget

Ansøger

(affiliation)

Ansøgt beløb inklusiv overhead

Faglig kategori

Københavns Universitet

KU - DIKU *771*

Production, materials, digitalization

kr.

and ICT

Production, materials, digitalization

and ICT

kr.

Production, materials, digitalization

kr.

and ICT

kr.

Production, materials, digitalization

kr.

and ICT

Production, materials, digitalization

kr.

and ICT

Production, materials, digitalization

and ICT

kr.

Production, materials, digitalization

kr.

and ICT

Production, materials, digitalization

and ICT

kr.

Production, materials, digitalization

and ICT

kr.

Production, materials, digitalization

kr.

and ICT

Production, materials, digitalization

kr.

and ICT

kr.

11.382.702 kr.

10.157.330 kr.

22.463.015 kr.

11.643.990 kr.

16.994.011 kr.

33.334.290 kr.

17.624.499 kr.

41.635.832 kr.

18.863.999 kr.

7.236.155

7.094.012

INV - Invitation

Danmarks Tekniske Universitet

KU - JUR - Fakultetet

JP/POLITIKENS HUS A/S

Danmarks Tekniske Universitet

Enabled Robotics ApS

14.050.852

7.476.610

10.758.808

22.518.895

11.751.900

INV - Invitation

Danmarks Tekniske Universitet

Fotonik

Danmarks Tekniske Universitet

25.057.643

10.316.999

INV - Invitation

Syddansk Universitet (University of

Southern Denmark)

Aalborg Universitet

NORDISK STAAL A/S

Region Hovedstaden

KU - SCIENCE - DATALOGISK INSTITUT Biotech, medico and health

- UP1

InnoCon Medical ApS

Biotech, medico and health

10.267.440 kr.

21.933.619 kr.

14.547.259 kr.

31.076.820 kr.

18.892.456 kr.

7.583.021

INV - Invitation

14.519.491

10.972.409

24.996.531

13.822.355

INV - Invitation

kr.

RIGSHOSPITALET

DataFair ApS

Teknologisk Institut, Skejby

GRAFF BREEDING A/S

Ørsted Wind Power A/S

Aalborg Universitet, RBG14

Biotech, medico and health

8.442.557 kr.

6.503.502

INV - Invitation

kr.

24.256.854 kr.

78.514.160 kr.

14.915.965 kr.

18.444.238 kr.

40.812.652 kr.

27.478.628 kr.

13.285.613 kr.

55.693.366 kr.

14.995.846

INV - Invitation

24.212.932 INV - Invitation

10.194.519

12.056.037

22.843.287

18.239.314

INV - Invitation

9.868.222

29.997.880

INV - Invitation

Production, materials, digitalization

kr.

and ICT

Bioresources, food and biotech

kr.

Energy, climate and environment

kr.

Danmarks Tekniske Universitet

MAN Energy Solutions, filial af MAN

Energy Solutions SE, TYSKLAND

Infrastructure, transport and

construction

Energy, climate and environment

kr.

INV - Invitation

Aarhus Universitet, Bygn 5366, 5794- Production, materials, digitalization

5795

and ICT

kr.

22.724.952 kr.

16.964.068

INV - Invitation

Beslutning #2

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

Topsil GlobalWafers A/S

Aalborg Universitet

Danmarks Tekniske Universitet

Teknologisk Institut

AGCO A/S

Energy, climate and environment

Infrastructure, transport and

construction

Energy, climate and environment

kr.

3.681.244 kr.

26.115.015 kr.

18.359.306 kr.

33.110.356 kr.

9.850.920 kr.

2.758.499

18.967.510

13.282.477

21.592.479

5.099.113

INV - Invitation

Aarhus Universitet

Energy, climate and environment

kr.

I-GIS A/S

Aalborg Universitet, PON111

ECCO SKO A/S

Energy, climate and environment

kr.

21.796.245 kr.

32.291.391 kr.

42.857.097 kr.

31.247.221 kr.

16.158.545

INV - Invitation

24.372.428

30.755.005

12.022.541

INV - Invitation

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

Kontrakt underskrevet

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

sag

abstract

0177-00002AHemp4Tex will develop Danish sustainable and low carbon foot-print hemp textile fabrics for the tex

0177-00004AStarQuality

establishes a series of scienMﬁc and industrial plaOorms to reduce global environmental f

0177-00006AAn increasing number of wind turbines are reaching end of life and will soon have to be decommissio

0177-00021ADREAMS develop digitalised decision support tools to promote Sustainable Development Goals (SDG

0177-00022AROROGREEN is a project that aims at bringing Denmark a step closer to sustainable Roll-on Roll-oﬀ (R

0177-00029AAmmonia as a marine fuel has the potential to completely decarbonize the marine industry. The pro

0177-00035AThis project addresses the grand challenge of plastic waste handling and recycling. Industrial analysis

0177-00046AIn ‘Improved Float Zone Silicon for BeQer Stability in Power Conversion´, ImproSil, TOPSIL, a world lea

0177-00065AThe Mvolt project aims to foster a paradigm shiY in wind systems by developing disrupMve power ele

0177-00066ALarge energy demand for cooling data centers (DCs) is jeopardizing the eﬀort to reach deep decarbon

0177-00071AAalborg Portland aims to become the world’s leading cement producer to supply low-carbon calcined

0177-00084AGrass is currently recognized as the most environmentally beneﬁcial crop in arable farming and is exp

0177-00085AOne consequence of climate change is more extreme weather paQerns, which combined with over-e

0177-00086ADepending on their present condition, peatlands can store a huge amount of carbon (C) or be a sour

0177-00103AHydroThermal LiquefacMon (HTL) has proven itself as the most resource-, energy- and cost eﬃcient t

0177-00109AECCO, DTU and BioScavenge have joined forces to tackle one of the most prominent challenges in th

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

hemp textile fabrics for the textile industry which can replace cotton fabrics and create a local production of hemp fibers, yarns and fabric

reduce global environmental footprint from plant producMon and to increase internaMonal compeMMveness of Danish plant breeding.

l soon have to be decommissioned. However, wind turbine blades (WTBs) made of glass ﬁber reinforced thermoset composites are not ea

able Development Goals (SDGs) and green transiMon by advancing environmental assessment (EA) to integrate SDGs and enable faster, be

o sustainable Roll-on Roll-oﬀ (RoRo) shipping. The project uses digital innovaMon to monitor RoRo shipping emissions and opMmize the ind

e the marine industry. The project aim is to demonstrate at full scale a large marine engine that operates on ammonia and to do so at the

nd recycling. Industrial analysis is needed during recycling of household collected plastic waste. Introducing industrial relevant analysis tec

´, ImproSil, TOPSIL, a world leading ﬂoat-zone (FZ) silicon manufacturer will leverage the technological experMse of Aarhus University (AU)

eveloping disrupMve power electronic soluMons based on a novel ability to increase voltage levels signiﬁcantly, namely medium voltage – t

eﬀort to reach deep decarbonizaMon target. Cool-Data develops, assesses and implements a modular, secure and reliable integrated cool

r to supply low-carbon calcined clay-limestone (CCL) cements for all typical cement applicaMons. This project will develop the next generaM

op in arable farming and is expected to play an even bigger role in the future value chain of sustainable and proﬁtable food producMon. Th

s, which combined with over-exploitaMon of groundwater have severe consequences for people, especially in developing countries.

ount of carbon (C) or be a source of carbon dioxide (CO2), which is a crucial challenge globally. In Denmark, peatlands constitute a key targ

e-, energy- and cost eﬃcient technology pathway for conversion to liquid fuels of a wide range of sustainable feedstocks, including agricul

ost prominent challenges in the tanning industry. The GreenTan-project aims at recovery and reuse of water and energy in one of ECCO’s

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

n of hemp fibers, yarns and fabric. Producers of hemp crops and manufacturers of fibers, textile industry and designers will share the valu

ness of Danish plant breeding.

The project exploits naturally occurring plant-microbe interacMons, the emerging New Breeding Technologie

thermoset composites are not easy to recycle and mostly end in landﬁll or incinerated. To create a viable business case for recycling WTB

tegrate SDGs and enable faster, beQer and more democraMc decision-making processes.EAs are obligatory for a series of decisions on ener

ng emissions and opMmize the industry's operaMonal and strategic planning. By doing so, we reduce the fuel consumpMon of the used vess

s on ammonia and to do so at the MAN research facilities in Copenhagen. The projects will cover three main parts: 1) The concept develop

ing industrial relevant analysis techniques enables plastic sorting, product documentation, and materials traceability. Our approach is to i

xperMse of Aarhus University (AU), which has a strong presence in the ﬁeld of semiconductor physics, in order to reduce detrimental varia

cantly, namely medium voltage – this opens the door to unseen ﬂexibility in usage of system components. High impact wind, solar and sto

ecure and reliable integrated cooling energy system for DCs. The cooling soluMon includes an innovaMve phase-change material (PCM) sto

oject will develop the next generaMon cements based on the FUTURECEM (trademark) technology. The target within 10 years is to pave the

and proﬁtable food producMon. This is especially due to the emerging development of technologies for protein extracMon and reﬁnement

lly in developing countries.The aim of SuperTEM is to provide technologies that monitor changes in ground water levels or intruding saltw

rk, peatlands constitute a key target to achieve the national goal of reducing CO2 emissions with 70% by 2030. There is thus a great need

nable feedstocks, including agricultural (manures, straw, cu[ngs/shavings etc) and urban (organic waste, sewage sludge etc). However, wh

ater and energy in one of ECCO’s tanneries in the Netherlands, and thereby decreasing its environmental footprint and increasing its prof

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

y and designers will share the value of (estimated) 250 mill DKK/year in DK. Hemp4Tex will approach the whole value chain using innovati

merging New Breeding Technologies (NBT) and Classical Breeding Techniques (CBT) to develop naturally bushy QUALITY plant varieMes that

e business case for recycling WTBs, DecomBlades aims at establishing a funcMonal value chain to handle end of life WTBs from decommiss

ry for a series of decisions on energy supply, transport, manufacturing, construcMon, mining and agriculture, forestry and ﬁshery, which ac

fuel consumpMon of the used vessels, which have the highest impact factor on the GHG emissions produced during mariMme shipping. The

main parts: 1) The concept development and initial design of an ammonia engine. 2) The design of an ammonia fuel supply system. 3) Test

s traceability. Our approach is to introduce three broad spectral cameras for inline plastic analysis in a conveyer system. By coupling the o

order to reduce detrimental variances in the quality of FZ silicon. High quality material is a criMcal requirement for Silicon based power ele

s. High impact wind, solar and storage systems use the same components today but do not share them. Signiﬁcant advantages are genera

phase-change material (PCM) storage and state-of-the art controller system using arMﬁcial intelligence (AI) developed during the project.

arget within 10 years is to pave the road for implementaMon of cements with extreme clinker replacements well beyond what is accepted

protein extracMon and reﬁnement for animal forage producMon, replacing imported soybeans.Due to this, grass producMon will play an inc

und water levels or intruding saltwater without having to establish expensive boreholes. The monitoring results are delivered directly to th

y 2030. There is thus a great need to investigate the spatial variability of peat soil properties in order to assess the total amount of C store

sewage sludge etc). However, whereas the HTL part of the process is relaMvely well established from a research & innovaMon perspecMve

al footprint and increasing its profitability. Key activities will include comprehensive monitoring, technology development, digital twin mo

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

whole value chain using innovative solutions scalable for industrial production of uniform hemp fibers and yarns of high textile quality. T

ushy QUALITY plant varieMes that today are highly demanded for decreasing the environmental footprints of the ornamental industry and

end of life WTBs from decommissioning, to re-processing and reuse in new applicaMons. DecomBlades partners see three promising recy

ure, forestry and ﬁshery, which according to StaMsMcs Denmark amounts to 84% of the total Danish GHG emissions. EA is therefore a key t

ced during mariMme shipping. The operaMonal eﬃciency gained by the opMmized procedures will lower costs, aQract more cargo from roa

mmonia fuel supply system. 3) Tests of ammonia operation at real scale on the 7MW 4S50ME-C test engine in Copenhagen. MAN will be le

onveyer system. By coupling the obtained spectroscopically signals with the chemical composition of the plastics, it will be possible to obt

ement for Silicon based power electronics devices, which are used to control and convert large currents. The market is huge with the insu

Signiﬁcant advantages are generated in this proposal that enable modularizaMon and sharing of components which improves RoI, sustaina

AI) developed during the project. The AI-based controller integrates the thermal storage to modular cooling equipment, resulMng in a mor

nts well beyond what is accepted by European standardisaMon and concrete standard with CO2 savings in the range of 50%. This requires

s, grass producMon will play an increased role in arable farming in coming years, and the importance of opMmizing the value chain of grass

results are delivered directly to the water manager operaMng a water well for immediate acMon.The scienMﬁc core is a novel way of using

assess the total amount of C stored in these soils. Through the combination of state-of-the-art hardware, software, modelling techniques

research & innovaMon perspecMve, the upgrading of the crude oil to marketable transportaMon is lacking in order for the technology to rea

ogy development, digital twin modelling, impact and feasibility assessment and technology implementation. Based on the preliminary ass

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

and yarns of high textile quality. The investment will be used at Danish universities, GTSs and Danish companies to develop and documen

ts of the ornamental industry and eliminaMng the latent threat of widespread plant virus epidemics. StarQuality uses “poinse[a”, Euphor

partners see three promising recycling technologies: cement kiln, pyrolysis and mechanical shredding. DecomBlades takes a crucial next st

G emissions. EA is therefore a key tool for improving impacts of decisions to promote green transiMon, climate miMgaMon and biodiversity i

costs, aQract more cargo from road to sea, and indirectly also reduce the emissions of road transport.

The project will use advanced techn

ne in Copenhagen. MAN will be leading the project and be responsible for all on-engine development and in particular for the developme

e plastics, it will be possible to obtain detail batch information and out-sort impurities for obtaining pure well documented recycled plastic

. The market is huge with the insulated gate bipolar transistor (IGBT) as the main power component having a market of 4.5 billion USD/yea

ents which improves RoI, sustainability, and reliability. The Mvolt project is designed to meet the societal need for sustainable power by l

ling equipment, resulMng in a more eﬃcient and ﬂexible cooling system (Figure 1). The PCM storage will support the ﬂexible use of cheap

n the range of 50%. This requires basic research within concrete durability and workability. On the shorter term, the target within 5 years

pMmizing the value chain of grass producMon becomes equally important.One of the main factors inﬂuencing the quality and yield of grass

enMﬁc core is a novel way of using transient electromagneMcs (TEM) to image subsurface structures and image Mme-varying groundwater

, software, modelling techniques and IT technologies (Figure 1), the present project will develop an overall methodology to map peatland

in order for the technology to reach broader acceptance and adopMon. Centered around a core of technical research and innovaMon, focu

tion. Based on the preliminary assessment, it is expected that 95% of water would be reused and more than 3 times energy would be har

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

mpanies to develop and document it is possible to produce a high-quality textile hemp fabric, which fulfill all requirements for end-users i

rQuality uses “poinse[a”, Euphorbia pulcherrima, “Christmas STAR” (ﬁgure A1), one of the most important ornamentals worldwide with a

ecomBlades takes a crucial next step to mature these processes and to establish each of the necessary steps in the value chain, such as da

mate miMgaMon and biodiversity improvements.

In Denmark, annually around 3,500 projects and plans are screened for whether they req

he project will use advanced technological hardware such as cameras, drones, mobile robots, and sensors, for automated data capturing.

nd in particular for the development of the systems for fuel injection, ignition, combustion and emission abatement, suitable for ammonia

well documented recycled plastic fractions. The system will be implemented in two national plastic recyclers and will benefit the Danish

ng a market of 4.5 billion USD/year. Therefore even a small improvement of the silicon substrate can have a large eﬀect. Power electronic

al need for sustainable power by lowering the Levelized Cost of Energy (LCoE) of wind energy, thereby increasing the pace with which clea

support the ﬂexible use of cheap and low-carbon electricity and waste heat. The project includes a systemic perspecMve to assess the imp

er term, the target within 5 years is to develop cements ready for use in the precast industry, which consMtutes 50% of the Danish concret

ncing the quality and yield of grass protein is Mmely cu[ng and collecMon of the grass in the ﬁeld. Today, the farmers have very limited info

image Mme-varying groundwater levels and interfaces between fresh and saline groundwater related to water extracMon wells.

rall methodology to map peatlands in detail and enable accurate estimates of CO2 emissions and potential C stocks. This methodology wil

ical research and innovaMon, focused on reﬁnery operaMons and catalysis, this project delivers a fully documented go to market strategy f

than 3 times energy would be harvested in the tannery. The current project would enable ECCO to take leather production to the next lev

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

ill all requirements for end-users in textile and fashion industry. LCA and TEA will document improvement of the impact on environment,

ant ornamentals worldwide with a yearly producMon of more than 500 mill plants [1,2], as model plant, and as demo-plant for Proof-of-Co

teps in the value chain, such as data speciﬁcaMon, logisMcs, process mapping and opMmizaMon, and demonstraMon.

A key strength of Deco

are screened for whether they require an EA or not, of which around 500 require a full EA. The cost is esMmated to around 350 million DKK

rs, for automated data capturing. The collected data will then be exploited by using arMﬁcial intelligence and opMmizaMon techniques for t

abatement, suitable for ammonia. EFT, a Danish supplier of fuel systems will design the ammonia fuel supply system together with MAN

yclers and will benefit the Danish circular plastic economy. Obtaining documentation and pure plastic fractions will enable the usage of re

ve a large eﬀect. Power electronics ﬁnd their applicaMons in e.g. renewable energy generaMon and electric transportaMon, and are current

ncreasing the pace with which clean energy can replace polluMng sources. To miMgate the risks of the disrupMve development the Mvolt ap

mic perspecMve to assess the impacts of the scaling up of the soluMon on greenhouse gas emissions and energy transiMon. We exploit the

sMtutes 50% of the Danish concrete market. This requires basic research within acMvaMon of calcined clay to signiﬁcantly increase the early

the farmers have very limited informaMon available to support these crucial tacMcal decisions.The proposed GrassProCast project aims to

water extracMon wells.We will develop: 1) low-cost instruments for monitoring groundwater and saltwater levels over Mme; 2) semi-airbo

ial C stocks. This methodology will provide decision-makers with detailed information and cost-effective tools to appropriately select whi

cumented go to market strategy for iniMal deployment and scale-up of HTL-derived sustainable aviaMon fuels (SAF) and marine fuels. Resu

leather production to the next level of sustainable production and make ECCO a role model for the leather industry BioScavenge as techn

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

nt of the impact on environment, climate and economic feasibility.

and as demo-plant for Proof-of-Concept (PoC), “bellﬂower” (wall bellﬂower, DalmaMan bellﬂower), Campanula portenschlagiana (ﬁgure A3

A key strength of DecomBlades is the strong interlink between the eight work packages and the partners. The knowledge and i

Mmated to around 350 million DKK per year, of which 30 % can be saved through DREAMS.DREAMS will be implemented in the Danish Env

and opMmizaMon techniques for the development of decision support tools. DFDS will partake in the project as a living lab for the technol

upply system together with MAN. DTU will support the combustion system development with their world leading expertise on ammonia

actions will enable the usage of recycled plastic material in the Danish plastic industry. Both the plastic industry and consumers generate a

ric transportaMon, and are currently seeing a rise in demand due to the ongoing transiMon towards green technology.

rupMve development the Mvolt approach is stepwise; (i) First new components are validated (ii) secondly system level implementaMon at

d energy transiMon. We exploit the synergy between ICT and energy sectors and develop new business models and regulatory pathways th

y to signiﬁcantly increase the early age strength. A 30% CO2 reducMon is expected, in line with the ﬁrst generaMon FUTURECEM targeMng r

osed GrassProCast project aims to develop a web-based decision support tool for TacMcal Planning in grass producMon and to make it com

ter levels over Mme; 2) semi-airborne imaging systems using drone-carriers; 3) an automated data management linked with cloud compuM

e tools to appropriately select which peatland areas to take out of agricultural production and restore. Notably, the combination of the dr

fuels (SAF) and marine fuels. Results will include design of opMmal upgrading pathways for jet and marine fuels, as well as novel catalyMc a

her industry BioScavenge as technology provider together with DTU will develop and test the solution at ECCO’s tannery in Dongen. This w

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

panula portenschlagiana (ﬁgure A3), a very important Danish (and Dutch) pot- and bedding plant specialty [3,4].

he partners. The knowledge and infrastructures required to fulﬁll the tasks are covered by the partners’ faciliMes and expert

be implemented in the Danish Environment Portal in collaboraMon with major consultancies and authoriMes. The outcomes are an o

oject as a living lab for the technologies and tools developed. The consorMum is composed of a number of vendors and unive

ld leading expertise on ammonia combustion chemistry and experimental work on smaller scale ammonia research engines. The world’s l

ndustry and consumers generate a strong pull for more recycled plastic and this technology is a causal step

n technology. Through closely correlated in-depth defect studies at Aarhus University and a close anal

y system level implementaMon at a power level of 0.5MW system is validated (iii) and lastly upscaling to 1MW is shown.

odels and regulatory pathways that maximize the beneﬁts of storage in integrated DCs. The Cool-Data will result i

eneraMon FUTURECEM targeMng ready-mixed concrete, which is expected approved for use Denmark by 2020. Development of

ss producMon and to make it commercially available to farmers by the end of the three-year project period

gement linked with cloud compuMng delivering direct feedback to water managers. The project team have a strong track-record

otably, the combination of the drone-mounted cutting-edge geophysical sensors, advanced 2D modelling techniques and 3D s

e fuels, as well as novel catalyMc and fracMonaMon approaches to reducing producMon costs. The consorMum con

ECCO’s tannery in Dongen. This will create a unique business opportunity for BioScavenge to become a preferred sustainability partner o

UFU, Alm.del - 2020-21 - Endeligt svar på spørgsmål 16: Spm. om Innovationsfonden mv., til uddannelses. og forskningsministeren

faciliMes and expert

Mes. The outcomes are an o

of vendors and unive

nia research engines. The world’s leading class

1MW is shown.

Development of

ve a strong track-record

ng techniques and 3D s

preferred sustainability partner of t